TZ750 CNC stainless steel flange high-speed drilling machine

Machine features: ● The bed, bed, box, carriage and other important parts are cast with cast iron (HT250), which has good rigidity and stability; ● Nanjing numerical control system is adopted for control, with a high degree of automation and stability; ● The screw and linear guides of the whole machine are made of Taiwan silver products; ● Hollow high-pressure water outlet from the spindle; ● The machine tool adopts fully enclosed protection type, which is convenient to observe and overall beautiful.

key word:

numerical control machine

Category:

Special machine tool for auto parts processing

Product accessories:

Hotline:

8657988925535

Contact

Online message

TZ750 CNC stainless steel flange high-speed drilling machine

This special equipment is a high-efficiency, high-precision, high-automatic drilling machine. The double-station four-jaw self-centering chuck is hydraulically clamped and can hold two parts at a time.

Machine features:

● The bed, bed, box, carriage and other important parts are cast with cast iron (HT250), which has good rigidity and stability;

● Nanjing CNC system is used for control, with high degree of automation and stability;

● The screw rod and linear guide rail of the whole machine adopt Taiwan silver products;

● Hollow high-pressure water out of the spindle;

● The machine tool adopts fully enclosed protection type, which is convenient to observe and overall beautiful.

Technical parameter

Specification	Technical parameter	Unit	Numerical value
Workbench	Table specifications (length X width)	mm	900x400
	T-slot	mm	3-14x115
	Maximum load of table	Kg	400
Spindle	Spindle head type		Manufacturer standard
	Servo. Main motor power	Kw	3.7
	Spindle speed	r/min	500-2200
	Spindle taper		BT40
	Tool holder installation method		Front compression
	Distance from spindle end to worktable	mm	150-600
Stroke	X axis maximum stroke	mm	750
	Y axis maximum travel	mm	400
	Z axis maximum stroke	mm	450
Feed	X axis rapid traverse speed	m/min	12
	Y axis rapid traverse speed	m/min	12
	Z axis rapid traverse speed	m/min	10
	X / Y / Z feed motor torque	Nm	X/Y/Z: 6/6/10
Cutter	Knife handle		BT40-25-75
Machine tool accuracy	X / Y / Z axis positioning accuracy	mm	0.01/0. 01/0. 012
	X / Y / Z axis repeat positioning accuracy	mm	0.006/0. 006/0. 01
	Surface roughness of machined parts		≤Ral.6um (steel)
Other	Dimensions	mm	2200x 1950x 1800
	Weight	Kg	About 2800kg
	Power supply		3￠-AC380V50Hz±5%

The standard configuration

Line item	Name	Line item	Name
1	KTCNC KT 838MV-C (optional)	2	Fully enclosed protective cover
3	Frequency converter	4	Tool holder BT40-25-75
5	Automatic lubrication pump	6	Φ320 manual four-jaw chuck
7	Work light	8	Hydraulic motor
9	Spindle hollow water	10	Manual double sliding door
11	Rail protection cover	12	Mobile MPG
13	Water tank + chip box (left and right)	14	Three-color warning light
15	Hydraulic station	16	Random technical documents

Optional

Serial number selection	Configuration	Y/N	Serial number selection	Configuration	Y/N
1	CNC turntable		2	Electric cabinet thermostat
3	Water separator		4	Taiwan Spindle
5	Built-in hydraulic chuck		6	Electric cabinet heat exchanger

Shock absorber JZT-450 CNC special drilling and tapping center at both ends

T8-500 CNC drilling and tapping center